Essential Tips for Maintaining Your Rubber Vulcanizing Press Machine

1. Cleaning up residual materials: After the end of each day's work, rubber fragments and impurities left on the equipment should be cleaned up in a timely manner to prevent corrosion or affect the normal operation of the equipment. 2. Check fasteners: C...

1. Cleaning equipment: Regularly clean the internal and external surface of machine to remove dust, residue, and oil stains.

Check and maintain electrical components: When performing maintenance on the rubber calender machine of the rolling mill, not only should attention be paid to the cleanliness of the pipelines, but also the electrical parts should be checked for loose or damaged terminals. Any loose connections should be reinforced in a timely manner, and damaged components should also be replaced in a timely manner to ensure the safe and stable operation of the machine.

Daily inspection and preparation of hydraulic oil inspection and addition: Before use, check the hydraulic oil level to ensure that the hydraulic oil height is 2/3 of the lower machine base. When the oil level is insufficient, pure 46 # hydraulic oil needs to be added after fine filtration. Lubrication inspection: Check the lubrication between the column shaft and the guide frame, and add oil in a timely manner to maintain good lubrication.

1.Disassembly and cleaning Thoroughly disassemble the rubber mixing mill machine, clean up impurities and debris from each component one by one, and ensure that no debris falls in when starting up. Disassembly should be thorough, cleaning should be meticulous...

The mixer needs to be thoroughly cleaned after use, and the dirt inside and outside the machine are cleaned to ensure the normal operation of the machine

On March 20, the after-sales team of Qingdao Ouli Machine went to Istanbul, Türkiye to install and commission two rubber compound production lines.

The construction of four mixed rubber production line factories for the second phase of the project is underway and is expected to start in July.

Including auto batch system, hydraulic rubber kneader machine, hydraulic distance adjustment open rubber mixing mill, batch off cooling machine.

The whole machine adopts Siemens PLC control, which can achieve fully automatic operation.