How to maintain rubber tyre sherdder machine

1. Cleaning up residual materials: After the end of each day's work, rubber fragments and impurities left on the equipment should be cleaned up in a timely manner to prevent corrosion or affect the normal operation of the equipment.

2. Check fasteners: Check whether the fasteners of the equipment are loose, such as screws, nuts, etc., to ensure that they are in a tightened state and avoid loosening of components due to vibration.

3. Lubricate bearings: Regularly add lubricating oil to the bearings to maintain lubrication between them and reduce friction and wear. Generally, the oil cup cover should be rotated a certain angle at regular intervals to press the lubricating grease inside the cup into the bearing.

4. Check the blade: Regularly check the wear of the blade, and if it is severely worn, it should be replaced in a timely manner. At the same time, ensure that the blade is securely installed to avoid damage caused by looseness.

5. Replacement of vulnerable parts: According to the usage of the equipment, regularly replace vulnerable parts such as liners, bearings, etc., to ensure the normal operation of the equipment.

6. Check transmission components: Regularly inspect the wear of transmission components, such as gears, belts, etc., to ensure that they are in good working condition.

7. Dust cleaning: Regularly open the inertia cover and pulley cover of the equipment, clean the dust at the ash outlet under the flange and the shaft bearing to prevent dust accumulation from affecting equipment performance.